Pump Hayward K-FLO SPK12605XY1E2 (220 V, 7.5 m3/h, 0.5 HP)

Pump Hayward K-FLO SPK12605XY1E2 (220 V, 7.5 m3/h, 0.5 HP)
Pump Hayward K-FLO SPK12605XY1E2 (220 V, 7.5 m3/h, 0.5 HP)
€434.00
Rating:
0% of 100
0
0  Reviews
Add new review
Number of phases
Energy efficiency class
Number of phases
Energy efficiency class
Quick purchase in 1 click
€434.00
Ready to ship
SKU
41408

Hayward K-FLO SPK12605XY1E2 centrifugal pump with prefilter. Used to filter and circulate water in private pools up to 30,000 liters. The pump housing and prefilter are made of thermoplastic. Hydraulic units made of Noryl and AISI 316 steel allow the pump to be used with salt and sea water. Equipped with a large capacity pre-filter. When installing the pump, an additional installation of a motor protection switch is required.

  • Capacity: 7.5 m³/h
  • Power: 0.61 kW
  • Connection: 50 mm
  • Motor energy efficiency class: IE2

Characteristic

More Information
Article SPK12605XY1 E2
Safety data Download
Purpose Private pools
For salt water Yes
Engine energy efficiency IE2
Presence of a prefilter Yes
Variable speed No
Number of phases 1 (220–240 V)
Maximum volume of the serviced pool, l 30 000
Productivity, m³/h (at h) 7.5 at 10 m
Useful power, l.s. 0.5
Power, kW 0.6
Connection 50 mm
Additional information
  • Pump housing: thermoplastic
  • Impeller and hydraulic components: Noryl
  • Salt water suitable
  • Protection class pump: IP55
  • Insulation class: F
  • Frequency: 50Hz
  • Current: 3.2A
Packed weight, kg 12.5
Size 590х311.7х244 mm
Manufacturer Hayward
Country of Manufacture France
Product warranty 24 months. The warranty is subject to timely regular maintenance and replacement of consumables. When installing the pump an additional motor protection circuit breaker is required.
Operating guidelines

The equipment is designed for clean water and does not replace drainage pumps. Please observe the following rules:

  • Sand is a strong abrasive. Suction of a small amount of sand is acceptable, but it accelerates component wear.
  • Simultaneous suction of large accumulations of sand or dirt (especially during pool opening after winter) blocks the impeller, leads to overheating and subsequent motor burnout, and voids the warranty.
  • If the pool is heavily contaminated, vacuum the debris with a manual pool cleaner using slow movements, and make sure to set the filter to the Waste mode so the dirt goes directly to the drain.

Reviews and Questions (0)

Be the first to share your experience!

Your review about Pump Hayward K-FLO SPK12605XY1E2 (220 V, 7.5 m3/h, 0.5 HP) will help other buyers make the right choice.

€434.00